CAD-Colour Sportsfilm Printable (Express Print) is a lightweight, printable heat transfer material which is perfectly suited for printing smaller details and can be cut after a short drying time, greatly increasing profitability. With a very soft finish and the ability to stick to even the toughest of garment fabrics, such as Lycra®/spandex and nylon, it's perfect for workwear, sportswear and leisurewear requirements.
It's available at a size of 1000mm wide by the roll which is 25m long. It's also available in other widths of 500mm, 750mm and 1500mm.
Due to the combination of fabrics, weaves, and dyes used in the textile industry, testing is pertinent. Stahls’ recommends and provides samples of our materials and medias for testing.
- 100% cotton
- Poly-cotton blends
- Lycra®/Spandex blends
- Woven nylon*
- Nylon knits*
- 100% polyester*
(* Always test on coated polyester and nylon)
- Washable up to 60°C.
- Virtually no drying time.
- Cuts and weeds easily.
- Soft, matt, pliable finish.
Printing & Cutting Advice:
- You should always perform a test print and cut prior to any production run.
- Remember that your plotter settings will need to be adjusted as your blade or smart knife ages and begins to blunt.
- For optimal cutting and weeding, maintain a minimum line thickness of 3mm (1/8”) for lettering & logos.
- Temp: 160°c
- Time: 10 seconds
- Pressure: Medium (#4-6 on Hotronix®)
- Peel: Warm
- For best results, wash garment inside out.
- Allow 24 hours before first wash.
- Machine wash warm up to 60°c.
- Wash using mild detergent.
- Tumble dry at a normal dryer setting on household machines.
- Do not dry clean.
- Do not use bleach.
- Can be directly ironed onto reverse.
- Store in a cool, dry area.
- Avoid direct heat, sunlight and humidity.
- Release Paper or Non-Stick Cover Sheet.
- Stahls EZ Weeder®
- CAD-COLOUR® Super Mask
Still Looking For More Information?
Still looking for answers? If you're new to heat pressing, or are looking for advice and support, take a look at our Frequently Asked Questions to see if you can find the answer that you're looking for.