Simply place the mask over your design once you’ve weeded the excess material away (either manually or using a cold laminator), using a squeegee to remove any air bubbles from between the heat transfer and the CAD-Colour Magic Mask High Tack, and then remove the design from the backing carrier for easy and consistent positioning during the heat application process to produce a high-quality finished graphic or image. Heat apply the heat transfer in accordance with the application instructions provided for the specific printable heat transfer media.
CAD-Colour Magic Mask High Tack is available at a size of 500mm wide by the roll which is 50m long, and is also available in a width of 1000mm. It’s recommended for the following printable heat transfer vinyls:
- SuperTEK Opaque 2.0.
- SuperTEK Sublistop 2.0.
- CAD-Colour Sportsfilm Printable.
- CAD-Colour Nylon.
- CAD-Colour Sublistop.
- CAD-Colour Silver.