Digi-Print Sportsfilm Heat Transfer Leadtimes
Our Digi-Print Sportsfilm custom heat transfers are manufactured in the UK and are usually despatched within TWO working days of confirmation of the artwork and colour references.
With a very soft finish and the ability to stick to even the toughest of garment fabrics, such as Lycra®/spandex and nylon, in addition to standard fabrics such as cotton and polyester, it’s perfect for workwear, sportswear and leisurewear requirements.
Note: Due to the production process, we have to add a 2mm keyline around the intended design, although this can be coloured to match closely to the garment. Alternatively, we can add a “bleed edge” if the design allows.
Due to the combination of fabrics, weaves, and dyes used in the textile industry, testing is pertinent – We offer free samples of all of our custom heat transfers for testing purposes.
- 100% cotton
- Poly-cotton blends
- Lycra®/Spandex blends
- Woven nylon*
- Nylon knits*
- 100% polyester*
(* Always test on coated polyester and nylon)
- Temp: 160°c
- Time: 10 seconds
- Pressure: Medium (40-50psi)
- Peel: Warm
- For best results, wash garment inside out.
- Allow 24 hours before first wash.
- Machine wash warm up to 60°c.
- Wash using mild detergent.
- Tumble dry at a normal dryer setting on household machines.
- Do not dry clean.
- Do not use bleach.
- Can be directly ironed onto reverse (without steam).