Our 20cm x 25cm (8" x 10") lower heat press platen protectors are a non-stick fitted cover that fits snugly over the lower platen (similar to an ironing board cover) of any heat press sized 20cm x 25cm (8" x 10"), not just the Stahls and Hotronix range.

Price: £37.00 (excluding VAT at 20%)

Availability: In stock

They are specifically designed to reduce wear and tear on the silicon mat on the lower platen and prevents excess inks, dyes and adhesives from penetrating into the silicon, in addition to making it easier to slide garments on and off the lower platen. They are very easy to clean and are essential to prolonging the life of the heat press bed.

To keep the platen covers clean, simply wipe them with a damp cloth to remove any residue or buildup on the surface.

They are also available in five other sizes:

  • 15cm x 25cm (6" x 10")
     
  • 28cm x 38cm (11" x 15")
     
  • 38cm x 38cm (15" x 15")
     
  • 40cm x 40cm (16" x 16")
     
  • 40cm x 50cm (16" x 20")
     

We also supply a non-stick heat press upper platen protector, which protects both your heat press and garments by keeping the upper platen clean and free of inks, adhesives, and excess residue, which is available in 40cm x 50cm (16" x 20").  While it doesn’t replace the need for a PTFE non-stick cover sheet, many heat press operators find it invaluable - Direct-to-garment (DTG) and sublimation printers consider it an essential tool to protect their heat press from steam and chemical build-up.

 


Still Looking For More Information?

To find out more details on the products and services that we supply, please fill out our simple form to Request More Information, or Contact Us via email or telephone.

Still looking for answers? If you're new to heat pressing, or are looking for advice and support, take a look at our Frequently Asked Questions to see if you can find the answer that you're looking for.

Related Products

20cm x 25cm Interchangeable Lower Platen for Hotronix Heat Presses 20cm x 25cm Interchangeable Lower Platen for Hotronix Heat Presses
The 20cm x 25cm (8" x 10") Hotronix® Lower Platen is designed for the application of smaller designs, such as heat pressing onto tote and polypropylene bags by sliding the bag around the platen for...
Non-stick PTFE Heat Transfer Teflon Cover Sheet (46cm x 49cm) Non-stick PTFE Heat Transfer Teflon Cover Sheet (46cm x 49cm)
At a size of 46cm by 49cm (18" x 19") our reusable, non-stick PTFE Teflon cover is a perfect aide when heat applying heat transfers.  It achieves a semi-permanent gloss finish to heat transfers when...
Stahls 15cm x 25cm (6” x 10”) Heat Press Lower Platen Protector Stahls 15cm x 25cm (6” x 10”) Heat Press Lower Platen Protector
Our 15cm x 25cm (6" x 10") lower heat press platen protectors are a non-stick fitted cover that fits snugly over the lower platen (similar to an ironing board cover) of any heat press sized 15cm x...

Badgers of Blackpool
60 Kenilworth Gardens
Blackpool, Lancashire
FY4 1JJ

Tel: 01253 349917

Email: This email address is being protected from spambots. You need JavaScript enabled to view it.